3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

N/A 184.15 mm7.25 in

Dimension D

N/A 231.775 mm9.1250 in

Dimension C/B

N/A 76.20 mm3.00 in

Specifications

Static Load Rating Co

N/A 1130 kN253000 lbf
Dynamic Load Rating C11 N/A 524 kN118000 lbf
Geometry Factor Cg2 N/A 0.1586

Speed Ratings - Oil

N/A 1800 rpm

Speed Ratings - Grease

N/A 1600 rpm

Weight

N/A 17.390 lb7.888 Kg

Mounting Data

Chamfer rsmin

N/A 3.05 mm0.12 in

Max. Mounting Dimensions Clearance Fit 1

N/A 184.15 mm7.25 in

Min. Mounting Dimensions Clearance Fit 1

N/A 184.120 mm7.2488 in

Max. Mounting Dimensions Clearance Fit 2

N/A 231.821 mm9.1268 in

Min. Mounting Dimensions Clearance Fit 2

N/A 231.775 mm9.125 in

Max. Mounting Dimensions Tight Transition Fit S

N/A 184.099 mm7.2480 in

Min. Mounting Dimensions Tight Transition Fit S

N/A 184.069 mm7.2468 in

Max. Mounting Dimensions Tight Transition Fit H

N/A 231.714 mm9.1226 in

Min. Mounting Dimensions Tight Transition Fit H

N/A 231.760 mm9.1244 in

Shoulder Diameter Da

N/A 216.00 mm8.500 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

N/A IR-9611648
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.