3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

N/A 101.60 mm4.00 in

Dimension D

N/A 127.000 mm5.0000 in

Dimension C/B

N/A 50.80 mm2.00 in

Specifications

Static Load Rating Co

N/A 428 kN96200 lbf
Dynamic Load Rating C11 N/A 201 kN45100 lbf
Geometry Factor Cg2 N/A 0.1060

Speed Ratings - Oil

N/A 3500 rpm

Speed Ratings - Grease

N/A 3100 rpm

Weight

N/A 3.397 lb1.541 Kg

Mounting Data

Chamfer rsmin

N/A 2.54 mm0.10 in

Max. Mounting Dimensions Clearance Fit 1

N/A 101.60 mm4.00 in

Min. Mounting Dimensions Clearance Fit 1

N/A 101.577 mm3.9991 in

Max. Mounting Dimensions Clearance Fit 2

N/A 127.041 mm5.0016 in

Min. Mounting Dimensions Clearance Fit 2

N/A 127.000 mm5.000 in

Max. Mounting Dimensions Tight Transition Fit S

N/A 101.564 mm3.9986 in

Min. Mounting Dimensions Tight Transition Fit S

N/A 101.542 mm3.9977 in

Max. Mounting Dimensions Tight Transition Fit H

N/A 126.944 mm4.9978 in

Min. Mounting Dimensions Tight Transition Fit H

N/A 126.985 mm4.9994 in

Shoulder Diameter Da

N/A 117.48 mm4.625 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

N/A IR-526432 IR-546432 IR-566432
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.