Batch CAD Cart (0)
  • Cart is empty
  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).
Unit of Measure

Specifications

Bearing Bore

N/A 95 mm

Locknut

N/A AN 19

Lockwasher

N/A W 19

Threads

Major Diameter

N/A 94.74 mm3.73 in

Threads No. per Inch

N/A 12

Shaft

Relief Diameter A

N/A 91.62 mm3.607 in

Diameter S-3

N/A 90.49 mm3.5625 in
W1 N/A 4.37 mm0.172 in
L2 N/A 17.45 mm0.687 in
H3 N/A 4 mm0.156 in
S4 N/A 9.53 mm0.375 in
M5 N/A 6.35 mm0.25 in

Locknut

C1

N/A 125.55 mm4.943 in

D

N/A 18.52 mm0.729 in

Lockwasher

Q

N/A 2.13 mm0.084 in

R

N/A 96.52 mm3.8 in

B

N/A 132.56 mm5.219 in

s

N/A 8.97 mm0.353 in
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.