Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TS (Tapered Single) Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TS (Tapered Single) > Tapered Roller Bearings - TS (Tapered Single) Imperial > Part Number A6067 - A6157  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number A6067 - A6157, Tapered Roller Bearings - TS (Tapered Single) Imperial


This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
A6000

Cone Part Number
A6067

Cup Part Number
A6157

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
0.6690 in
16.993 mm

D - Cup Outer Diameter
1.5745 in
39.992 mm

B - Cone Width
0.4391 in
11.153 mm

C - Cup Width
0.3750 in
9.525 mm

T - Bearing Width
0.4730 in
12.014 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.03 in
0.800 mm

r - Cup Backface "To Clear" Radius2
0.050 in
1.27 mm

da - Cone Frontface Backing Diameter
0.83 in
21 mm

db - Cone Backface Backing Diameter
0.87 in
22 mm

Da - Cup Frontface Backing Diameter
1.48 in
37.59 mm

Db - Cup Backface Backing Diameter
1.34 in
34.04 mm

Ab - Cage-Cone Frontface Clearance
0.09 in
2.3 mm

Aa - Cage-Cone Backface Clearance
0.01 in
0.3 mm

a - Effective Center Location3
-0.06 in
-1.5 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
782 lbf
3480 N

C1 - Dynamic Radial Rating (1 million revolutions)2
3020 lbf
13400 N

C0 - Static Radial Rating
2770 lbf
12300 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
705 lbf
3140 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.11

e - ISO Factor2
0.53

Y - ISO Factor3
1.14

G1 - Heat Generation Factor (Roller-Raceway)
2.9

G2 - Heat Generation Factor (Rib-Roller End)
5.64

Cg - Geometry Factor4
0.0404
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances



Add To Cart Request Quote
<