• Timken_TRB_SINGLECUP_TS
  • TRB TS Cup Line Drawing
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
526 - 550 of 1864 | Results Per Page | View | Unit of Measure
« 21 22 23 24 25 »  
Compare Items
Clear Filter

O.D. (D) (in)

O.D. (D) (mm)

Part Number

O.D. (D)

Outer Ring Width (C)

CAD

N/A 3.4843 in88.501 mm N/A 1.3125 in33.338 mm N/A
N/A 3.5450 in90.043 mm N/A 1.3125 in33.338 mm N/A
N/A 3.7500 in95.250 mm N/A 0.8750 in22.225 mm N/A
N/A 3.7500 in95.250 mm N/A 0.8750 in22.225 mm N/A
N/A 3.7500 in95.250 mm N/A 1.0313 in26.195 mm N/A
N/A 3.4843 in88.501 mm N/A 1.1875 in30.163 mm N/A
N/A 3 in76.2 mm N/A 0.6563 in16.670 mm N/A
N/A 3.125 in79.375 mm N/A 0.6875 in17.463 mm N/A
N/A 3.1562 in80.167 mm N/A 0.9375 in23.813 mm N/A
N/A 3.2500 in82.550 mm N/A 0.6875 in17.463 mm N/A
N/A 3.5625 in90.488 mm N/A 1.3125 in33.338 mm N/A
N/A 51.0000 in1295.400 mm N/A 5.1250 in130.175 mm N/A
N/A 16.5000 in419.100 mm N/A 2.4375 in61.913 mm N/A
N/A 16.5000 in419.100 mm N/A 2.4375 in61.913 mm N/A
N/A 3.4843 in88.501 mm N/A 0.6875 in17.463 mm N/A
N/A 3.5430 in89.992 mm N/A 0.6875 in17.463 mm N/A
N/A 12.1250 in307.975 mm N/A 2.4375 in61.913 mm N/A
N/A 12.5000 in317.500 mm N/A 2.4375 in61.913 mm N/A
N/A 4.25 in107.95 mm N/A 1.063 in27 mm N/A
N/A 3.9843 in101.201 mm N/A 1.3125 in33.338 mm N/A
N/A 4.1250 in104.775 mm N/A 0.9375 in23.813 mm N/A
N/A 4.1250 in104.775 mm N/A 0.9375 in23.813 mm N/A
N/A 4.1875 in106.363 mm N/A 0.9375 in23.813 mm N/A
N/A 4.25 in107.95 mm N/A 1.063 in27 mm N/A
N/A 4.25 in107.95 mm N/A 1.063 in27 mm N/A
526 - 550 of 1864 | Results Per Page | View | Unit of Measure
« 21 22 23 24 25 »