• Timken_TRB_SINGLECUP_TS
  • TRB TS Cup Line Drawing
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
901 - 925 of 1864 | Results Per Page | View | Unit of Measure
« 36 37 38 39 40 »  
Compare Items
Clear Filter

O.D. (D) (in)

O.D. (D) (mm)

Part Number

O.D. (D)

Outer Ring Width (C)

CAD

854V N/A 7.5 in190.5 mm N/A 1.75 in44.45 mm N/A
854X N/A 7.875 in200.025 mm N/A 1.9375 in49.213 mm N/A
85845 N/A 8.4375 in214.313 mm N/A 1.4375 in36.513 mm N/A
86100 N/A 10.000 in254 mm N/A 1.3125 in33.338 mm N/A
86100W N/A 10.000 in254 mm N/A 1.3125 in33.338 mm N/A
86105 N/A 10.5 in266.7 mm N/A 1.3125 in33.338 mm N/A
87111 N/A 11.1250 in282.575 mm N/A 1.4375 in36.513 mm N/A
87111XX N/A 11.1250 in282.575 mm N/A 1.4375 in36.513 mm N/A
88126 N/A 12.6250 in320.675 mm N/A 1.3125 in33.338 mm N/A
88126-SA N/A 12.6250 in320.675 mm N/A 1.3125 in33.338 mm N/A
88128 N/A 12.875 in327.025 mm N/A 1.375 in34.925 mm N/A
8820 N/A 13.5000 in342.900 mm N/A 1.375 in34.925 mm N/A
89148 N/A 15.0000 in381.000 mm N/A 1.4375 in36.513 mm N/A
89150 N/A 15.0000 in381.000 mm N/A 1.75 in44.45 mm N/A
892 N/A 9.0000 in228.600 mm N/A 1.75 in44.45 mm N/A
8920 N/A 11.7500 in298.450 mm N/A 1.25 in31.75 mm N/A
892-SA N/A 9.0000 in228.600 mm N/A 1.75 in44.45 mm N/A
90744 N/A 7.4375 in188.913 mm N/A 1.25 in31.75 mm N/A
91112 N/A 11.2500 in285.750 mm N/A 1.625 in41.275 mm N/A
9120 N/A 6.2500 in158.750 mm N/A 1.375 in34.925 mm N/A
9121 N/A 6.000 in152.4 mm N/A 1.25 in31.75 mm N/A
912400 N/A 24.0000 in609.600 mm N/A 2.375 in60.325 mm N/A
921850 N/A 18.5000 in469.900 mm N/A 2.25 in57.15 mm N/A
921875 N/A 18.7500 in476.250 mm N/A 2.25 in57.15 mm N/A
9220 N/A 6.3750 in161.925 mm N/A 1.25 in31.75 mm N/A
901 - 925 of 1864 | Results Per Page | View | Unit of Measure
« 36 37 38 39 40 »