Advanced Search On The Timken Company

Unit of Measure

Cone Part Number
Cup Part Number
Bore (d) (mm)	At Least:No More Than: Available Range: 20 to 100
Bore (d) (in)	At Least:No More Than: Available Range: 0.7874 to 3.937
O.D. (D) (mm)	At Least:No More Than: Available Range: 42 to 180
O.D. (D) (in)	At Least:No More Than: Available Range: 1.6535 to 7.0866
Width (T) (mm)	At Least:No More Than: Available Range: 15 to 37
Width (T) (in)	At Least:No More Than: Available Range: 0.5906 to 1.4567
Dynamic Radial Load Rating - 1M Revs (C1) (N) ¹	At Least:No More Than: Available Range: 32900 to 357000
Dynamic Radial Load Rating - 1M Revs (C1) (lbf) ²	At Least:No More Than: Available Range: 7390 to 80200
Dynamic Radial Load Rating - 90M Revs (C90) (N) ³	At Least:No More Than: Available Range: 8520 to 92400
Dynamic Radial Load Rating - 90M Revs (C90) (lbf) ⁴	At Least:No More Than: Available Range: 1920 to 20800
e Factor ⁵	At Least:No More Than: Available Range: 0.37 to 0.46
Y Factor ⁶	At Least:No More Than: Available Range: 1.31 to 1.6

Max Shaft Fillet Radius (mm) ⁷	At Least:No More Than: Available Range: 0.64 to 3.3
Max Shaft Fillet Radius (in) ⁸	At Least:No More Than: Available Range: 0.03 to 0.13
Max Housing Fillet Radius (mm) ⁹	At Least:No More Than: Available Range: 0.64 to 2.54
Max Housing Fillet Radius (in) ¹⁰	At Least:No More Than: Available Range: 0.03 to 0.1

Dynamic Axial Rating - 90M Revs (Ca90) (N) ¹¹	At Least:No More Than: Available Range: 5460 to 66500
Dynamic Axial Rating - 90M Revs (Ca90) (lbf) ¹²	At Least:No More Than: Available Range: 1230 to 14900
Static Radial Load Rating (C0) (N)	At Least:No More Than: Available Range: 29400 to 375000
Static Radial Load Rating (C0) (lbf)	At Least:No More Than: Available Range: 6600 to 84300

¹ Based on 1 x 10⁶ revolutions L₁₀ life, for the ISO life calculation method.
² Based on 1 x 10⁶ revolutions L₁₀ life, for the ISO life calculation method.
³ Based on 90 x 10⁶ revolutions L₁₀ life, for The Timken Company life calculation method. C₉₀ and C_a90 are radial and thrust values.
⁴ Based on 90 x 10⁶ revolutions L₁₀ life, for The Timken Company life calculation method. C₉₀ and C_a90 are radial and thrust values.
⁵ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁶ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁷ These maximum fillet radii will be cleared by the bearing corners.
⁸ These maximum fillet radii will be cleared by the bearing corners.
⁹ These maximum fillet radii will be cleared by the bearing corners.
¹⁰ These maximum fillet radii will be cleared by the bearing corners.
¹¹ Based on 90 x 10⁶ revolutions L₁₀ life, for The Timken Company life calculation method. C₉₀ and C_a90 are radial and thrust values for a single-row, C₉₀₍₂₎ is the two-row radial value.
¹² Based on 90 x 10⁶ revolutions L₁₀ life, for The Timken Company life calculation method. C₉₀ and C_a90 are radial and thrust values for a single-row, C₉₀₍₂₎ is the two-row radial value.

Clear Cancel Advanced Search