Batch CAD Cart (0)
  • Cart is empty
Type E tapered roller bearing Mounted Bearings are available in a wide variety of sizes and configurations to meet the requirements of demanding applications. Popular part numbers are in stock for immediate availability. Metric sizes also are available in shaft diameters ranging from 35 mm to 125 mm.
Unit of Measure
Items
Timken_HU_TRB_4BF_TypeE-A

Type E Flange: 4-Bolt Bearing

Timken_HU_TRB_4BF_TypeE-A-solidlube

Type E Flange: 4-Bolt Bearing

Timken_HU_TRB_4BF_TypeE-A-solidlube

Type E Flange: 4-Bolt Bearing

Timken_HU_TRB_4BF_TypeE-A

Type E Flange: 4-Bolt Bearing

Timken_HU_TRB_4BF_TypeE-A-solidlube

Type E Flange: 4-Bolt Bearing
Shaft Size N/A 1 3/16 in N/A 1 3/16 in N/A 1 3/16 in N/A 1 1/4 in N/A 1 1/4 in
Shaft Size Type N/A Imperial
Dimension B  N/A 2-3/4 in
Dimension L  N/A 3-3/4 in
Dimension A  N/A 2-11/32 in
Dimension J  N/A 2 7/8 in
Dimension A2  N/A 1/16 in
Bolt Diameter  N/A 3/8 in
Dimension A1  N/A 1 in
Dimension D 1 N/A 2-15/16 in
Dimension d1  N/A 2-1/4 in
Dimension Ac  N/A
Dimension d2  N/A
e N/A 0.49
X (if Fa/Fr ≤ e) N/A 0.87
Y (if Fa/Fr ≤ e) N/A 1.77
X (if Fa/Fr > e) N/A 0.7
Y (if Fa/Fr > e) N/A 2.14
K Factor N/A 1.23
C90 Dynamic Load Rating2 N/A 3810 lbf
C0 Static Load Rating N/A 15760 lbf
Fa-max Maximum Permissible Thrust Load3 N/A 2000 lbf
Fr-max Maximum Allowable Slip Fit Radial Load4 N/A 3100 lbf
Max. Speed5 N/A 4490 rpm
UPC Code N/A 053893544489 N/A N/A N/A 053893544526 N/A
Type E Open Cover Number N/A
Type E Closed Cover Number N/A
Lubrication N/A Grease - Premium Industrial N/A Solid Lube - Food Grade N/A Solid Lube - Food Grade N/A Grease - Premium Industrial N/A Solid Lube - Food Grade
Housing Coating N/A E-Coat
Weight N/A 4 lb
  • 1 Tolerance +.000 /-.002 in
  • 2 C90 is the Dynamic Load Rating based on a rated Life of 90 million revolutions (3000 hrs at 500 RPM).
  • 3 Fa-max is based on the limits of the holding force of two properly tightened collars and set screws. Fifty percent of the values should be used when a single collar is installed.
  • 4 If the application loads approach or exceed Fr-max, the shaft fit should be adjusted to a line-to-line (g6 or h6) or light press fit (m6).
  • 5 Timken Double Lip Seal