Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Key Features
    • Longer bearing life achieved from higher capacity (vs. competitors)
    • Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
    • Better contaminant purging from slots on cage face helps extend bearing life
    • Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a hardened steel cage
Unit of Measure

Key Dimensions

UPC Code

 N/A 087796023802

Bore (d)

 N/A 50 mm

O.D. (D)

 N/A 110 mm4.3307 in

Width (B)

 N/A 40 mm1.5748 in

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 238000 N53500 lbf
e Factor1 N/A 0.36

Other Dimensions

Max Shaft Fillet Radius2 N/A 2.0 mm0.080 in

Shaft Backing Shoulder Diameter

 N/A 65 mm2.600 in

Housing Backing Shoulder Diameter

 N/A 98.000 mm3.900 in

Design Unit

 N/A Metric

Ratings

Static Radial Load Rating (C0)

 N/A 241000 N54200 lbf
Thermal Reference Speed - Oil3 N/A 5600 rpm

Thermal Reference Speed - Grease

 N/A 4700 rpm

Factors

Y0 Factor4 N/A 1.85
Y1 Factor 5 N/A 1.89
Y2 Factor6 N/A 2.81
Geometry Factor (Cg)7 N/A 0.0549
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 See thermal speed ratings in the engineering section.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Geometry constant for Lubrication Life Adjustment Factor a3l.