The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Timken® Self-Aligning Tapered Roller Bearing Mounted Bearings are designed for applications from aggregate and steel to mining and power generation. The heavy duty housing and cartridge are made from cast steel to stand up to the harshest conditions, and are designed to accept +/-4 degrees of misalignment.. Metric sizes also are available in shaft diameters ranging from 60 mm to 125 mm.

Open and Closed end covers available for purchase.
Type-ESA-Pillow-Block-4-Bolt-Base-Bearing
Type ESA Pillow Block-4Bolt_2
Unit of Measure
Items Type-ESA-Pillow-Block-4-Bolt-Base-Bearing
ESA-P4B-TRB-2 1/4
Self-Aligning Tapered Roller Bearing Pillow Block: 4-Bolt Base Mounted Bearings 		Type-ESA-Pillow-Block-4-Bolt-Base-Bearing
ESA-P4B-TRB-2 1/4E
Self-Aligning Tapered Roller Bearing Pillow Block: 4-Bolt Base Mounted Bearings 		Type-ESA-Pillow-Block-4-Bolt-Base-Bearing
SAFSA-P4B-TRB-2 1/4
Self-Aligning Tapered Roller Bearing Pillow Block: 4-Bolt Base Mounted Bearings 		Type-ESA-Pillow-Block-4-Bolt-Base-Bearing
SAFSA-P4B-TRB-2 1/4E
Self-Aligning Tapered Roller Bearing Pillow Block: 4-Bolt Base Mounted Bearings 		Type-ESA-Pillow-Block-4-Bolt-Base-Bearing
SNSA-P4B-TRB-2 1/4
Self-Aligning Tapered Roller Bearing Pillow Block: 4-Bolt Base Mounted Bearings
Shaft Size N/A 2 1/4 in
Shaft Size Type N/A Imperial
Dimension B  N/A 4 in N/A 4 in N/A 4 in N/A 4 in N/A 101.6 mm4 in
Dimension L  N/A 10-3/8 in N/A 10-3/8 in N/A 10-5/16 in N/A 10-5/16 in N/A 261.9 mm10-5/16 in
Dimension A  N/A 3-1/2 in N/A 3-1/2 in N/A 3-1/2 in N/A 3-1/2 in N/A 88.9 mm3-1/2 in
Dimension J Min.  N/A 7-3/4 in N/A 7-3/4 in N/A 7-1/2 in N/A 7-1/2 in N/A 190.5 mm7-1/2 in
Dimension J Max.  N/A 8-3/4 in N/A 8-3/4 in N/A 8-9/16 in N/A 8-9/16 in N/A 217.5 mm8-9/16 in
Bolt Diameter  N/A 5/8 in N/A 5/8 in N/A 1/2 in N/A 1/2 in N/A 16 mm5/8 in
Dimension N  N/A 3/4 in N/A 3/4 in N/A 9/16 in N/A 9/16 in N/A 17.5 mm11/16 in
Dimension N1  N/A 1-1/4 in N/A 1-1/4 in N/A 1-3/32 in N/A 1-3/32 in N/A 27.8 mm1-3/32 in
Dimension N2  N/A 1-7/8 in N/A 1-7/8 in N/A 2 in N/A 2 in N/A 48.4 mm1-29/32 in
Dimension H1  N/A 1-5/8 in N/A 1-5/8 in N/A 1-3/8 in N/A 1-3/8 in N/A 38.9 mm1-17/32 in
Dimension H2  N/A 6-1/16 in N/A 6-1/16 in N/A 6-5/16 in N/A 6-5/16 in N/A 163.9 mm6-29/64 in
Dimension d1  N/A 4-1/16 in N/A 4-1/16 in N/A 4-1/16 in N/A 4-1/16 in N/A 103.2 mm4-1/16 in
Dimension H  N/A 2-3/4 in N/A 2-3/4 in N/A 3 in N/A 3 in N/A 80.2 mm3-5/32 in
Dimension W  N/A 6-13/32 in N/A 6-13/32 in N/A 6-13/32 in N/A 6-13/32 in N/A 162.7 mm6-13/32 in
EXPANSION N/A N/A 9/16 in N/A N/A 9/16 in N/A
Weight N/A 32.1 lb N/A 32.1 lb N/A 27.1 lb N/A 27.1 lb N/A 30.622 lb
e N/A 0.40
X (if Fa/Fr ≤ e) N/A 0.87
Y (if Fa/Fr ≤ e) N/A 2.17
X (if Fa/Fr > e) N/A 0.7
Y (if Fa/Fr > e) N/A 2.63
K Factor N/A 1.51
C90 Dynamic Load Rating1 N/A 11600 lbf
C0 Static Load Rating N/A 54000 lbf
Fa-max Maximum Permissible Thrust Load2 N/A 3454 lbf
Fr-max Maximum Allowable Slip Fit Radial Load3 N/A 9500 lbf
Max. Speed4 N/A 2420 rpm
Type E Open Cover Number N/A
Type E Closed Cover Number N/A
Lubrication N/A Grease - Premium Industrial
Housing Type N/A Type E Self-Aligning N/A Type E Self-Aligning N/A SAF Self-Aligning N/A SAF Self-Aligning N/A SN Self-Aligning
Housing Coating N/A Powder Coat
  • 1 C90 is the Dynamic Load Rating based on a rated Life of 90 million revolutions (3000 hrs at 500 RPM).
  • 2 Fa-max is based on the limits of the holding force of two properly tightened collars and set screws. Fifty percent of the values should be used when a single collar is installed.
  • 3 If the application loads approach or exceed Fr-max, the shaft fit should be adjusted to a line-to-line (g6 or h6) or light press fit (m6).
  • 4 Timken Double Lip Seal