COMPANY HEADER
Print Back
  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

 N/A 4.25 in

D - Outer Diameter

 N/A 5.25 in

Dimension C/B

 N/A 2.0000 in

Key Dimensions

Static Load Rating Co

 N/A 444000 N99900 lbf
Dynamic Load Rating C11 N/A 203000 N45700 lbf
Geometry Factor Cg2 N/A 0.1099

Thermal Speed Ratings - Oil

 N/A 3300 rpm

Thermal Speed Ratings - Grease

 N/A 2900 rpm

Mounting Data

Chamfer rsmin

 N/A 0.1 in

Max. Mounting Dimensions Clearance Fit 1

 N/A 4.25 in

Min. Mounting Dimensions Clearance Fit 1

 N/A 4.2491 in

Max. Mounting Dimensions Clearance Fit 2

 N/A 5.2516 in

Min. Mounting Dimensions Clearance Fit 2

 N/A 5.250 in

Max. Mounting Dimensions Tight Transition Fit S

 N/A 107.914 in

Min. Mounting Dimensions Tight Transition Fit S

 N/A 4.2477 in

Max. Mounting Dimensions Tight Transition Fit H

 N/A 5.2478 in

Min. Mounting Dimensions Tight Transition Fit H

 N/A 5.2494 in

Shoulder Diameter Da

 N/A 4.875 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

 N/A IR-566832 IR-606832
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.