COMPANY HEADER
Print Back
Unit of Measure

Key Dimensions

Design Units

 N/A Metric

Type

 N/A NU

Dimensions

D - Outer Diameter

 N/A 15.7500 in

C - Inner Ring Width

 N/A 3.1252 in

B - Outer Ring Width

 N/A 3.1252 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 1810000 N407000 lbf
C - Dynamic Radial Rating1 N/A 1160000 N261000 lbf

Factors

Reference Thermal Speed Rating (Grease)

 N/A 790 rpm
Reference Thermal Speed Rating (Oil)2 N/A 890 rpm
Cg - Geometry Factor3 N/A 0.1625

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius4 N/A 0.200 in
r - Outer Ring "To Clear" Radius5 N/A 0.200 in

Da - Outer Ring Backing Diameter

 N/A 0.0000 in
  • 1 Based on 1 x 106 L10 life for the ISO life calculation method.
  • 2 See thermal speed ratings in the engineering section.
  • 3 Geometry constant for Lubrication Life Adjustment Factor a3l.
  • 4 Maximum housing fillet radius that bearing corners will clear.
  • 5 Maximum shaft fillet radius that bearing corners will clear.