COMPANY HEADER
Print Back
The answer to versatility in design.
For extra-special design needs, this unit incorporates a Tri-Ply bearing mounted in two stampings, riveted together with two o-rings.
Available in two basic size groups, one incorporating a 209 and the other a 211 bearing.
Both Size groups offer these features.
  • Dynamic alignment capability.
  • Shroud effect from close clearance of stamping to inner ring.
  • Relubrication.
  • One unit piece for ease of handling and assembly.
  • Fitting flange mates with outer ring milled recess, preventing possibility of outer ring circumferential movement.
  • Stampings are case hardened to minimize wear.
  • Units are equipped with nylon retainer, molded one-piece seals and patented notched outer ring seal grooves.
Unit of Measure

Specifications

Serie

 N/A Imperial

Shaft Diameter

 N/A 1 1/4 in

Bore Shape

 N/A SQ.

Bearing Type

 N/A Ball Bearing

Housing Construction

 N/A One Unit Piece Housing

Dimensions

Housing Width A

 N/A 1.672 in

Flange Thickness A1

 N/A 0.266 in

Dimension H

 N/A 2.359 in

Total Width L

 N/A 5 in

Minimum Frame Openning H2

 N/A 4 in

Bolt Circle Diameter J

 N/A 5 in

Boly Hole Size N

 N/A 0.532 in

Boly Hole Size N1

 N/A 0.657 in

Inside Ring Width B

 N/A 1.75 in

Inside Ring Outside Diameter G

 N/A 2.279 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 18000 N4000 lbf

CE - Extended Dynamic Load Rating

 N/A 36500 N8150 lbf