COMPANY HEADER
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

Cage Type

 N/A EM

UPC Code

 N/A 087796234987

Cage Material

 N/A Brass

Superseded Part

 N/A 22230YMW33C4

Dimensions

D - Outer Diameter

 N/A 10.6299 in

B' - Inner Ring Width

 N/A 2.874 in

B - Outer Ring Width

 N/A 2.8740 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.100 in
r - Outer Ring "To Clear" Radius2 N/A 0.1 in

da - Inner Ring Backing Diameter

 N/A 7.0000 in

Da - Outer Ring Backing Diameter

 N/A 9.7000 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 276000 lbf1230000 N

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 225000 lbf1000000 N

Factors

e - ISO Factor3 N/A 0.25
Y0 - ISO Factor4 N/A 2.63
Y1 - ISO Factor5 N/A 2.69
Y2 - ISO Factor6 N/A 4

Reference Thermal Speed Rating (Grease)

 N/A 2000 rpm
Reference Thermal Speed Rating (Oil)7 N/A 2400 rpm
Cg - Geometry Factor8 N/A 0.0899
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.