COMPANY HEADER
Print Back
Key Features
    • Longer bearing life achieved from higher capacity (vs. competitors)
    • Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
    • Improved bearing performance in extreme operating conditions, minimizing impact of contaminants that can get caught in the bearing's roller and cage due to an enhanced cage bridge design
    • Extend bearing life in applications with extreme shock/vibration, high gravitational forces and minimal lubrication conditions due to the extra strength and durability provided by our machined brass cage
Unit of Measure

Specifications

Design Unit

 N/A Metric

d - Bore

 N/A 70 mm

Cage Type

 N/A EM

UPC Code

 N/A 087796026377

Cage Material

 N/A Brass

Superseded Part

 N/A 22314YMW33W800C4

Dimensions

D - Outer Diameter

 N/A 5.9052 in149.993 mm

B' - Inner Ring Width

 N/A 2.0079 in51 mm

B - Outer Ring Width

 N/A 2.0079 in51 mm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.080 in2.0 mm
r - Outer Ring "To Clear" Radius2 N/A 0.08 in2 mm

da - Inner Ring Backing Diameter

 N/A 91 mm3.6000 in

Da - Outer Ring Backing Diameter

 N/A 135.000 mm5.300 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 93100 lbf414000 N

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 88800 lbf395000 N

Factors

e - ISO Factor3 N/A 0.33
Y0 - ISO Factor4 N/A 2.02
Y1 - ISO Factor5 N/A 2.07
Y2 - ISO Factor6 N/A 3.08

Reference Thermal Speed Rating (Grease)

 N/A 3600 rpm
Reference Thermal Speed Rating (Oil)7 N/A 4300 rpm
Cg - Geometry Factor8 N/A 0.0589
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.