COMPANY HEADER
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

Cage Type

 N/A YMD

Cage Material

 N/A Brass

Dimensions

D - Outer Diameter

 N/A 65.3540 in

B' - Inner Ring Width

 N/A 13.976 in

B - Outer Ring Width

 N/A 13.9760 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.280 in
r - Outer Ring "To Clear" Radius2 N/A 0.280 in

da - Inner Ring Backing Diameter

 N/A 50.890 in

Da - Outer Ring Backing Diameter

 N/A 61.340 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 9700000 lbf43200000 N

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 4320000 lbf19200000 N

Factors

e - ISO Factor3 N/A 0.19
Y0 - ISO Factor4 N/A 3.42
Y1 - ISO Factor5 N/A 3.5
Y2 - ISO Factor6 N/A 5.21

Reference Thermal Speed Rating (Grease)

 N/A 160 rpm
Reference Thermal Speed Rating (Oil)7 N/A 170 rpm
Cg - Geometry Factor8 N/A 0.170
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.