COMPANY HEADER
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

Cage Type

 N/A EM

UPC Code

 N/A 087796031852

Cage Material

 N/A Brass

Superseded Part

 N/A 23318YMW33W800C4

Dimensions

D - Outer Diameter

 N/A 7.480 in

B' - Inner Ring Width

 N/A 2.874 in

B - Outer Ring Width

 N/A 2.8740 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.100 in
r - Outer Ring "To Clear" Radius2 N/A 0.1 in

da - Inner Ring Backing Diameter

 N/A 4.3000 in

Da - Outer Ring Backing Diameter

 N/A 6.600 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 151000 lbf672000 N

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 140000 lbf623000 N

Factors

e - ISO Factor3 N/A 0.4
Y0 - ISO Factor4 N/A 1.66
Y1 - ISO Factor5 N/A 1.7
Y2 - ISO Factor6 N/A 2.52

Reference Thermal Speed Rating (Grease)

 N/A 2200 rpm
Reference Thermal Speed Rating (Oil)7 N/A 2500 rpm
Cg - Geometry Factor8 N/A 0.0665
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.