COMPANY HEADER
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

Bore_Taper

 N/A 1/12

Cage Type

 N/A YMB

UPC Code

 N/A 087796229440

Cage Material

 N/A Brass

Dimensions

D - Outer Diameter

 N/A 40.551 in

B' - Inner Ring Width

 N/A 12.402 in

B - Outer Ring Width

 N/A 12.4020 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.24 in
r - Outer Ring "To Clear" Radius2 N/A 0.24 in

da - Inner Ring Backing Diameter

 N/A 28.200 in

Da - Outer Ring Backing Diameter

 N/A 37.000 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 21200000 N4760000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 11700000 N2630000 lbf

Factors

e - ISO Factor3 N/A 0.29
Y0 - ISO Factor4 N/A 2.25
Y1 - ISO Factor5 N/A 2.3
Y2 - ISO Factor6 N/A 3.42

Reference Thermal Speed Rating (Grease)

 N/A 240 rpm
Reference Thermal Speed Rating (Oil)7 N/A 260 rpm
Cg - Geometry Factor8 N/A 0.1235
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.