COMPANY HEADER
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

Cage Type

 N/A EMB

UPC Code

 N/A 087796081987

Cage Material

 N/A Brass

Superseded Part

 N/A 23144YMBW33W40C3

Dimensions

D - Outer Diameter

 N/A 14.5669 in

B' - Inner Ring Width

 N/A 4.7244 in

B - Outer Ring Width

 N/A 4.7244 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.120 in
r - Outer Ring "To Clear" Radius2 N/A 0.12 in

da - Inner Ring Backing Diameter

 N/A 9.9000 in

Da - Outer Ring Backing Diameter

 N/A 13.2000 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 2740000 N616000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 1940000 N436000 lbf

Factors

e - ISO Factor3 N/A 0.31
Y0 - ISO Factor4 N/A 2.12
Y1 - ISO Factor5 N/A 2.17
Y2 - ISO Factor6 N/A 3.24

Reference Thermal Speed Rating (Grease)

 N/A 1100 rpm
Reference Thermal Speed Rating (Oil)7 N/A 1200 rpm
Cg - Geometry Factor8 N/A 0.1033
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.