COMPANY HEADER
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

Bore_Taper

 N/A 1/12

Cage Type

 N/A EMB

UPC Code

 N/A 087796176560

Cage Material

 N/A Brass

Superseded Part

 N/A 23264KYMBW906AC3

Dimensions

D - Outer Diameter

 N/A 22.8350 in

B' - Inner Ring Width

 N/A 8.189 in

B - Outer Ring Width

 N/A 8.1890 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.160 in
r - Outer Ring "To Clear" Radius2 N/A 0.16 in

da - Inner Ring Backing Diameter

 N/A 14.8000 in

Da - Outer Ring Backing Diameter

 N/A 20.300 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 7090000 N1590000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 4770000 N1070000 lbf

Factors

e - ISO Factor3 N/A 0.34
Y0 - ISO Factor4 N/A 1.93
Y1 - ISO Factor5 N/A 1.98
Y2 - ISO Factor6 N/A 2.94

Reference Thermal Speed Rating (Grease)

 N/A 490 rpm
Reference Thermal Speed Rating (Oil)7 N/A 540 rpm
Cg - Geometry Factor8 N/A 0.1354
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.