COMPANY HEADER
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

Cage Type

 N/A YMB

UPC Code

 N/A 087796315013

Cage Material

 N/A Brass

Dimensions

D - Outer Diameter

 N/A 24.409 in

B' - Inner Ring Width

 N/A 7.874 in

B - Outer Ring Width

 N/A 7.874 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.160 in
r - Outer Ring "To Clear" Radius2 N/A 0.16 in

da - Inner Ring Backing Diameter

 N/A 18.2000 in

Da - Outer Ring Backing Diameter

 N/A 22.700 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 8630000 N1940000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 4390000 N987000 lbf

Factors

e - ISO Factor3 N/A 0.29
Y0 - ISO Factor4 N/A 2.31
Y1 - ISO Factor5 N/A 2.37
Y2 - ISO Factor6 N/A 3.52

Reference Thermal Speed Rating (Grease)

 N/A 450 rpm
Reference Thermal Speed Rating (Oil)7 N/A 500 rpm
Cg - Geometry Factor8 N/A 0.0934
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.