The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).
Unit of Measure

Specifications

Bearing Bore

 N/A 160 mm

Locknut

 N/A AN 32

Lockwasher

 N/A W 32

Threads

Major Diameter

 N/A 159.61 mm6.284 in

Threads No. per Inch

 N/A 8

Shaft

Relief Diameter A

 N/A 155.17 mm6.109 in

Diameter S-3

 N/A 153.99 mm6 1/16 in
W1 N/A 4.37 mm0.172 in
L2 N/A 26.19 mm1.031 in
H3 N/A 6 mm0.234 in
S4 N/A 15.88 mm0.625 in
M5 N/A 9.53 mm0.375 in

Locknut

C1

 N/A 204.93 mm8.068 in

D

 N/A 26.44 mm1.041 in

Lockwasher

Q

 N/A 3.71 mm0.146 in

R

 N/A 162.28 mm6.389 in

B

 N/A 214.33 mm8.438 in

s

 N/A 14.99 mm0.59 in
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)