The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
  • Specifically designed for the pump industry, this coupling accommodates industry standard as well as special pump/motor separation
  • This shaft separation facilitates easy pump repair of pump packing, bearings, and seals without disturbing pump or motor mounting and alignment
  • The SC Type coupling consists of two flanges, a sleeve and two shaft hubs
Quick Coupling Removal
  • The center drop out section consists of two flanges and the flexible sleeve
  • The flange is bolted to the shaft hub with four hex head cap screws
  • The center drop out section can be removed by removing the hex head cap screws
  • Flats on each hub provides a convenient grip for a wrench in order to facilitate loosening of the screws and, if desired, turning of the pump/motor shafts
  • Once the hub is removed from the pump shaft, maintenance on the pump can be done without disturbing equipment alignment
Unit of Measure

Specifications

Description 

 N/A 6SCH-SPCR HUB-27MMH7-8X3.3MMKW

Coupling Type

 N/A Coupling Hubs

Hub #

 N/A 6SCH

Material

 N/A Cast Iron

Color

 N/A Gray

Bore Type

 N/A Finished Bore

# of Cap Screws Required

 N/A 4

Coupling Type

 N/A S-Flex

Weight

 N/A 1.43 lb

Dimensional Data

Bore Size

 N/A 27.00 mm

Thread (Dimension T)

 N/A 5/16-18

Keyway Size (W x D)

 N/A 8 X 3.3 mm

Outside Diameter

 N/A 2.500 in63.50 mm

Max. Bore

 N/A 1.375 in34.93 mm

Dimension L

 N/A 1.220 in30.99 mm

Dimension SL

 N/A 0.630 in16.00 mm

Cap Screw Required Size

 N/A 1/4 - 1-3/4

Cubic inches

 N/A 7.62500 in³

Performance Data

Nominal Torque (with EPDM Sleeve)

 N/A 450 in·lb50.84 N·m

Max. Speed

 N/A 6000 rpm

Torsional Stiffness

 N/A 1718.00 in·lb/rad

Rated HP at 100 rpm

 N/A 0.70 hp

Rated HP at 1,200 rpm

 N/A 8.60 hp

Rated HP at 1,800 rpm

 N/A 12.90 hp

Rated HP at 3,600 rpm

 N/A 25.70 hp

Notes

Notes 

 N/A
  • SC = Standard Length
  • SCHS = Short Length