The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
  • Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
  • The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
  • Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
  • No clamps or screws are needed to connect the flanges with the flexible sleeve which securely lock together under torque for smooth transmission of power
  • Torque is transmitted through shear loading of the sleeve
  • All three sleeve materials are highly elastic which permits the S-Flex coupling to protect connected equipment from harmful shock loading, vibration, and shaft misalignment
H, HS Sleeve Types
    These sleeves feature both a one-piece solid (H) and two-piece split (HS) design and are molded of Hytrel. The sleeves in Hytrel material are designed to transmit power for high torque applications.
    Because of the design and the properties of the Hytrel molded sleeve, the H and HS sleeves should not be used as direct replacements for EPDM or Neoprene sleeves, and can only be used with S, TF, or SC flanges.
Unit of Measure

Specifications

Description 

 N/A 14HS-SLEEVE

Coupling Size

 N/A 14HS

Sleeve Type

 N/A HS

Type

 N/A Sleeves for S-Flex Endurance Couplings

Material

 N/A Hytrel®

Color

 N/A Orange

Connection Type A x B

 N/A Coupling Sleeve

Weight

 N/A 19.30 lb

Nominal Torque

 N/A 72480 in·lb8189.15 N·m

Dimensional Data

Min. Bore

 N/A 2.000 in

Max. Bore

 N/A 5.000 in

Length (Dimension G)

 N/A 3.250 in82.55 mm

Outside Diameter

 N/A 13.090 in332.49 mm

Dimension L

 N/A 6.500 in165.10 mm

Cubic inches

 N/A 556.88133 in³

Performance Data

Temperature

 N/A -65 to 250 ºF-54 to 121 ºC

Max. Speed

 N/A 2200 rpm

Angular Misalignment

 N/A 0.25 º

Max. Parallel Misalignment

 N/A 0.035 in

Max. Torsional Wind-Up Angle

 N/A 7.00 º

Axial Misalignment

 N/A 0.1250 in

Features

Features 

 N/A
    Hytrel is a polyester elastomer designed for high torque and high temperature applications and offers excellent resistance to chemical and oil conditions. Color is orange.

Notes

Notes 

 N/A
  • Operating Hytrel within a high service factor application is not recommended.
  • H and HS Type sleeves are designed for high torque applications, transmitting about 4 times as much power as an equivalent EPDM or Neoprene sleeve.
  • Hytrel sleeves can be used only with S or SC flanges and can not be used with J or B flanges.
  • Hytrel sleeves should not be used as direct replacements for EPDM or Neoprene applications.