The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
  • The same care taken in the selection of stationary pillow blocks must also be applied to selecting the proper take-up unit.
  • Load requirements should be carefully evaluated before specifying a particular take-up assembly.
  • Frame assembly and adjusting screw of TTU units are made of steel.
  • The bearing housing is cast iron. Steel or ductile iron housings are additional options.
  • Units include housing for adapter-mounted bearings only, for either fixed or float position (be sure to specify).
  • One stabilizing ring is included for fixed position assemblies.
  • Sealing is triple ring labyrinth or end closures.
  • For extremely contaminated environments, the DUSTAC seal is suggested.

Note: Speed ratings are found in dimension tables in the spherical roller bearing section.
Unit of Measure

Specifications

Diameter S-1

 N/A 1 15/16 in

Travel

 N/A 24 in

A

 N/A 4.625 in

B

 N/A 40 1/2 in

C

 N/A 3.5 in

E

 N/A 38.5 in

Bolt Size G

 N/A 5/8 in
H1 N/A 9 in
L2 N/A 4 in

N

 N/A 0.75 in

R

 N/A 7.25 in

T

 N/A 4 in

Bearing Number

 N/A 22211K
Adapter Assembly Number3 N/A SNW-11
Stabilizing Ring 1 Req’d4 N/A SR-11-0

Triple Seal 2 Req’d

 N/A LOR24
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Includes sleeve, locknut and lockwasher. Add shaft size to order.
  • 4 Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.