The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Key Dimensions

Design Unit

 N/A Metric

Bore (d)

 N/A 190 mm

O.D. (D)

 N/A 400 mm15.748 in

B' - Inner Ring Width

 N/A 155 mm6.1024 in

B - Outer Ring Width

 N/A 155 mm6.1024 in

Bore_Taper

 N/A 0

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 262000 N58900 lbf
e Factor1 N/A 0.31

Dimensions

R - Inner Ring "To Clear" Radius2 N/A 1.00 mm0.039 in
r - Outer Ring "To Clear" Radius3 N/A 1 mm0.039 in

Shaft Backing Shoulder Diameter

 N/A 83.3 mm3.2800 in

Housing Backing Shoulder Diameter

 N/A 106 mm4.17 in

Basic Load Ratings

Static Radial Load Rating (C0)

 N/A 200000 N44900 lbf

Thermal Reference Speed - Grease 

 N/A 730 rpm
Thermal Reference Speed - Oil4 N/A 790 rpm

Key Dimensions

Y0 Factor5 N/A 2.14

Factors

Y1 Factor 6 N/A 2.19
Y2 Factor 7 N/A 3.26
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 Maximum shaft fillet radius that bearing corners will clear.
  • 4 See thermal speed ratings in the engineering section.
  • 5 These factors apply for both inch and metric calculations. See engineering
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.