The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Key Dimensions

Design Unit

 N/A Metric

Bore (d)

 N/A 140 mm

O.D. (D)

 N/A 225 mm8.8583 in

B' - Inner Ring Width

 N/A 85 mm3.3465 in

B - Outer Ring Width

 N/A 85 mm3.3465 in

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 1290000 N289000 lbf
e Factor1 N/A 0.34

Dimensions

R - Inner Ring "To Clear" Radius2 N/A 2.0 mm0.080 in
r - Outer Ring "To Clear" Radius3 N/A 2 mm0.08 in

Shaft Backing Shoulder Diameter

 N/A 157.000 mm6.2000 in

Housing Backing Shoulder Diameter

 N/A 206 mm8.1000 in

Basic Load Ratings

Static Radial Load Rating (C0)

 N/A 894000 N201000 lbf

Thermal Reference Speed - Grease 

 N/A 1300 rpm
Thermal Reference Speed - Oil4 N/A 1500 rpm

Key Dimensions

Y0 Factor5 N/A 1.96

Factors

Y1 Factor 6 N/A 2.01
Y2 Factor 7 N/A 2.99
Geometry Factor (Cg)8 N/A 0.0821
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 Maximum shaft fillet radius that bearing corners will clear.
  • 4 See thermal speed ratings in the engineering section.
  • 5 These factors apply for both inch and metric calculations. See engineering
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.