COMPANY HEADER
Print Back
Key Features
    • Longer bearing life achieved from higher capacity (vs. competitors)
    • Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
    • Better contaminant purging from slots on cage face helps extend bearing life
    • Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a hardened steel cage
Unit of Measure

Key Dimensions

O.D. (D)

 N/A 6.2992 in

Width (B)

 N/A 1.4567 in

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 321000 N72200 lbf
e Factor1 N/A 0.23

Other Dimensions

Max Shaft Fillet Radius2 N/A 0.080 in

Shaft Backing Shoulder Diameter

 N/A 3.900 in

Housing Backing Shoulder Diameter

 N/A 5.700 in

Design Unit

 N/A Metric

Ratings

Static Radial Load Rating (C0)

 N/A 322000 N72400 lbf

Factors

Y0 Factor3 N/A 2.91
Y1 Factor 4 N/A 2.98
Y2 Factor5 N/A 4.43
Geometry Factor (Cg)6 N/A 0.062

Maximum Operating Speed

 N/A 720 rpm
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. See engineering
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Geometry constant for Lubrication Life Adjustment Factor a3l.