Part Number 22205KEJW33C3, Spherical Roller Bearings - Steel Cage On The Timken Company

Key Features

• Longer bearing life achieved from higher capacity (vs. competitors)

• Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers

• Better contaminant purging from slots on cage face helps extend bearing life

• Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a hardened steel cage

Unit of Measure

Key Dimensions | Other Dimensions | Ratings | Factors

Bore (d)	N/A 25 mm
O.D. (D)	N/A 52 mm2.0472 in
Width (B)	N/A 18 mm0.7087 in
Dynamic Radial Load Rating - 1M Revs (C1)	N/A 43100 N9690 lbf
e Factor¹	N/A 0.34

Max Shaft Fillet Radius²	N/A 1.00 mm0.040 in
Shaft Backing Shoulder Diameter	N/A 30.000 mm1.200 in
Housing Backing Shoulder Diameter	N/A 47.000 mm1.9000 in
Design Unit	N/A Metric

Static Radial Load Rating (C0)	N/A 50600 N11400 lbf
Thermal Reference Speed - Oil³	N/A 11700 rpm
Thermal Reference Speed - Grease	N/A 9300 rpm

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² Maximum housing fillet radius that bearing corners will clear.
³ See thermal speed ratings in the engineering section.
⁴ These factors apply for both inch and metric calculations. See engineering
⁵ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁶ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁷ Geometry constant for Lubrication Life Adjustment Factor a3l.

Bore (d)