COMPANY HEADER
Print Back
Key Features
    • Longer bearing life achieved from higher capacity (vs. competitors)
    • Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
    • Better contaminant purging from slots on cage face helps extend bearing life
    • Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a hardened steel cage
Unit of Measure

Key Dimensions

UPC Code

 N/A 087796357082

O.D. (D)

 N/A 8.8583 in

Width (B)

 N/A 2.6772 in

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 766000 N172000 lbf
e Factor1 N/A 0.27

Other Dimensions

Max Shaft Fillet Radius2 N/A 0.080 in

Shaft Backing Shoulder Diameter

 N/A 6.3000 in

Housing Backing Shoulder Diameter

 N/A 8.200 in

Design Unit

 N/A Metric

Ratings

Static Radial Load Rating (C0)

 N/A 1070000 N240000 lbf
Thermal Reference Speed - Oil3 N/A 2200 rpm

Thermal Reference Speed - Grease

 N/A 1900 rpm

Factors

Y0 Factor4 N/A 2.45
Y1 Factor 5 N/A 2.5
Y2 Factor6 N/A 3.72
Geometry Factor (Cg)7 N/A 0.0831
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 See thermal speed ratings in the engineering section.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Geometry constant for Lubrication Life Adjustment Factor a3l.