The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

UPC Code

 N/A 087796165014

Design Unit

 N/A Metric

d - Bore

 N/A 360.000 mm

Lubrication Type

 N/A Standard Grease

Cage Type

 N/A EJ

Cage Material

 N/A Steel

Superseded Part

 N/A 23172CJW509C08C3

Factors

e - ISO Factor1 N/A 0.29
Y0 - ISO Factor2 N/A 2.24
Y1 - ISO Factor3 N/A 2.29
Y2 - ISO Factor4 N/A 3.42

Reference Thermal Speed Rating (Grease)

 N/A 530 rpm
Reference Thermal Speed Rating (Oil)5 N/A 590 rpm
Cg - Geometry Factor6 N/A 0.1427

Dimensions

D - Outer Diameter

 N/A 600 mm23.6220 in

B' - Inner Ring Width

 N/A 192 mm7.559 in

B - Outer Ring Width

 N/A 192 mm7.5590 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius7 N/A 4 mm0.160 in
r - Outer Ring "To Clear" Radius8 N/A 4 mm0.16 in

da - Inner Ring Backing Diameter

 N/A 416 mm16.4000 in

Da - Outer Ring Backing Diameter

 N/A 546.000 mm21.500 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 7300000 N1640000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 4660000 N1050000 lbf
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. See engineering
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 See thermal speed ratings in the engineering section.
  • 6 Geometry constant for Lubrication Life Adjustment Factor a3l.
  • 7 Maximum housing fillet radius that bearing corners will clear.
  • 8 These maximum fillet radii will be cleared by the bearing corners.