The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

UPC Code

 N/A 087796314436

Design Unit

 N/A Metric

d - Bore

 N/A 200 mm

Lubrication Type

 N/A Standard Grease

Bore_Taper

 N/A 1/30

Cage Type

 N/A EJ

Cage Material

 N/A Steel

Superseded Part

 N/A 24040KCJW507C08C4

Factors

e - ISO Factor1 N/A 0.31
Y0 - ISO Factor2 N/A 2.12
Y1 - ISO Factor3 N/A 2.16
Y2 - ISO Factor4 N/A 3.22

Reference Thermal Speed Rating (Grease)

 N/A 1100 rpm
Reference Thermal Speed Rating (Oil)5 N/A 1300 rpm
Cg - Geometry Factor6 N/A 0.0956

Dimensions

D - Outer Diameter

 N/A 310 mm12.2047 in

B' - Inner Ring Width

 N/A 109 mm4.2913 in

B - Outer Ring Width

 N/A 109 mm4.2913 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius7 N/A 2 mm0.080 in
r - Outer Ring "To Clear" Radius8 N/A 2 mm0.08 in

da - Inner Ring Backing Diameter

 N/A 223.000 mm8.800 in

Da - Outer Ring Backing Diameter

 N/A 286.000 mm11.2000 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 2460000 N552000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 1560000 N351000 lbf
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. See engineering
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 See thermal speed ratings in the engineering section.
  • 6 Geometry constant for Lubrication Life Adjustment Factor a3l.
  • 7 Maximum housing fillet radius that bearing corners will clear.
  • 8 These maximum fillet radii will be cleared by the bearing corners.