Part Number TASD11K115S, Tapered Adapter Two-Bolt Pillow Block On The Timken Company

COMPANY HEADER

Print Back

Unit of Measure

Specifications | Dimensions | Radial and Thrust Factors | Engineering Seal Speed | Engineering Bearing Attributes | Engineering Internal Radial Clearance

Specifications

Engineering Group	N/A Mounted Bearing
Bearing Number	N/A 22211
Shaft Size	N/A 1 15/16 in
Shaft Size Type	N/A Imperial
Full Timken Part Number	N/A TASD11K115SB TASD11K115SC TASD11K115SEB TASD11K115SEC TASD11K115SEM TASD11K115SEN TASD11K115SEO TASD11K115SET TASD11K115SM TASD11K115SN TASD11K115SO TASD11K115ST
Locking Style	N/A Tapered Adapter
Housing Construction	N/A Two-Bolt Pillow Block

Dimensions

Dimension A	N/A 3.25 in
Dimension B	N/A 5.83 in
Dimension C	N/A 2.95 in
Dimension D Min	N/A 8.25 in
Dimension D Max	N/A 9.25 in
Dimension F	N/A 11 in
Dimension G	N/A 2.26 in
Dimension H	N/A 1.25 in
Dimension J (Bolt Size)	N/A 0.625 in
Dimension L	N/A 2.53 in
Dimension M	N/A 1.4 in
Dimension S	N/A 2.32 in

Radial and Thrust Factors

C0 - Static Load	N/A 31900 lbf142000 N
C - Dynamic Load (Basic)	N/A 31400 lbf140000 N
e - Geometry Factor	N/A 0.23
Y1 - Geometry Factor	N/A 2.95
Y2 - Geometry Factor	N/A 4.40

Engineering Seal Speed

Oil Lubrication - M/N Seal	N/A 2200 rpm
Oil Lubrication - T Seal	N/A 3800 rpm
Oil Lubrication - B/C/O Seal	N/A 1800 rpm
Grease Lubrication - M/N Seal	N/A 2200 rpm
Grease Lubrication - T Seal	N/A 3200 rpm
Grease Lubrication - B/C/O Seal	N/A 1600 rpm

Engineering Bearing Attributes

Float	N/A 0.050 in
Shaft Tolerance	N/A 0.0030 in

Engineering Internal Radial Clearance

Pre Install Clearance Min	N/A 0.0030 in
Pre Install Clearance Max	N/A 0.0037 in