The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

 N/A 52000

Cup Part Number

 N/A 52638

Design Units

 N/A Imperial

Dimensions

D - Cup Outer Diameter

 N/A 6-3/8 in161.925 mm

C - Cup Width

 N/A 1.1563 in29.370 mm

Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1 N/A 0.130 in3.30 mm

Da - Cup Frontface Backing Diameter

 N/A 6.08 in154.43 mm

Db - Cup Backface Backing Diameter

 N/A 5.63 in143.00 mm

Factors

e - ISO Factor2 N/A 0.47
Y - ISO Factor3 N/A 1.26
Cg - Geometry Factor4 N/A 0.152
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 Geometry constant for Lubrication Life Adjustment Factor a3l.