COMPANY HEADER
Print Back

●   UCT take-up units are suggested for industrial applications where normal loads are encountered.
●   UCT take-up units are used where shaft adjustment and belt-tightening devices are required, such as in conveyor applications.
●   These units provide compact, efficient supports for adjustable shafts and conveyer take-up pulleys.
●   Each unit comes assembled and ready for mounting.
●   These units use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.
●   Timken UCT series Mounted Bearings feature the Timken set screw locking (UC) bearing insert.
●   Bearing prelubricated and ready for immediate installation.
●   Grease fitting supplied for relubrication.
●   The bonded seal design is well-suited for industrial applications involving wet or dirty environments.
●   Slot spacing and width are interchangeable with competitive units.
●   Housing designed for ease of bearing replacement.
Unit of Measure

Specifications

Seal Type

 N/A IP69K Seal

Housing Material

 N/A Cast Stainless Steel

Bearing Number

 N/A SUC205-IP69K/F

Lubrication Type

 N/A Standard Food Safe Grease

Locking Style

 N/A Set Screw Locking

Housing Construction

 N/A Take-Up

Bearing Style

 N/A Ball Bearing

Dimensions

Total Length L

 N/A 3.661 in

Total Height H

 N/A 3.504 in

Adjustment Screw Bore N

 N/A 0.748 in

Openinig Width N1

 N/A 0.709 in

Openinig Width N2

 N/A 1.260 in

Slot Width A1

 N/A 0.472 in

Pitch Height H1

 N/A 2.992 in

Height H2

 N/A 1.811 in

Shaft Length L1

 N/A 2.362 in

Dimension L2

 N/A 0.354 in

Slot Length L3

 N/A 1.732 in

Socket Width A2

 N/A 0.984 in

Center of Bearing from Bearing End S

 N/A 0.563 in

Inner Ring Width B

 N/A 1.343 in

Basic Load Ratings

Dynamic Load Rating

 N/A 2676 lbf11900 N

Static Load Rating

 N/A 1417 lbf6300 N