The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back

Effective August 21st, 2023, the Naval Air Warfare Center Aircraft Division (NAWCAD) has disapproved Timken Aurora’s qualification status for SAE-AS81820 and SAE-AS81935 specifications. Timken Aurora is working diligently to get requalified.

  • Ball - 440C stainless steel per AMS 5630 - heat treated.
  • Optional Ball - 13-8 Mo stainless steel per AMS 5629 - heat treated. (Specify by adding suffix "C" ex.: ANC-3TC)
  • Race - 17-4 PH stainless steel per AMS 5643 - heat treated.
  • Optional plating on race outside diameter can be added by adding suffix "P" for zinc nickel or cad plating or suffix "E" for zinc nickel plating (ex.: ANC-3TP/ANC-3TE)
  • PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
  • Temperature Range: -65°F to + 325°F.
  • "K" designates Low Torque Bearing fit. No load rotational breakaway torque can be varied to meet specific application requirements.
  • Bearings can be ordered in an oversize outside diameter condition by adding suffix "D1" (.010") oversize or "D2" (.020") oversize (ex.: ANC-3TD1/ANC-3TD2)
  • Bearings listed are manufactured to conform to the dimensions, materials and configurations of SAE Specifications AS14101 (grooved) and AS14104 (plain), and are approved for procurement under these specifications.
ANC-T & ANC-TG Image
Unit of Measure
« 31 32 33 34 

Part Number

Bearing Type

B - Ball Bore

D - Outside Diameter

W - Ball Width

H - Race Width

O - Ball Shoulder Diameter

a - Misalignment Angle

Radial Static Limit Load Capacity

CAD

ANC-16TGCPD2 N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGCPK N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGCPKD1 N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGCPKD2 N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGE N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGED1 N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGED2 N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGEK N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGEKD1 N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGEKD2 N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGK N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGKD1 N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGKD2 N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGP N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGPD1 N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGPD2 N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGPK N/A Grooved N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGPKD1 N/A Grooved N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TGPKD2 N/A Grooved N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TK N/A Plain N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TKD1 N/A Plain N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TKD2 N/A Plain N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TP N/A Plain N/A 1.0000 in N/A 1.7500 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TPD1 N/A Plain N/A 1.0000 in N/A 1.7600 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
ANC-16TPD2 N/A Plain N/A 1.0000 in N/A 1.7700 in N/A 1.000 in N/A .797 in N/A 1.118 in N/A 9 º N/A 82,200 lbs N/A CAD
Unit of Measure
« 31 32 33 34