Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    AL Type Spider (Size AL150 Only)
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > INDUSTRIAL MOTION PRODUCTS > Couplings & Power Transmission Parts Catalog > Jaw Couplings > AL Type (Aluminum Jaw) Components > Part Number 68514418027  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number 68514418027, AL Type Spider (Size AL150 Only)


  • The AL Type coupling consists of two standard AL Type hubs and one spider(find under L Type components, or the AL section for AL150).



Unit of Measure: Imperial Metric Both

Specifications  · Dimensional Data  · Performance Data  · Spider Performance  · Elastomers in Compression  · Notes

Specifications

Description 
AL150-SPIDER-SOX

Coupling Type
Jaw

Material
SOX (NBR) Rubber

Insert Style
Solid

Color
Black

Chemical Resistance
Good

Weight
0.25 lb

Weight - Solid
3.70 lb

Weight (Complete Coupling w/ Max. Bores)
2.80 lb


Dimensional Data

Coupling
AL150

Thread (Dimension T)
5/16-18

Length thru Bore
.88 in
48.00 mm

Overall Length
4.500 in
114.30 mm

Outside Diameter
4.250 in
107.95 mm

Min. Bore (Dimensions ID1/ID2)
0.625 in
16.00 mm

Max. Bore (Dimensions ID1/ID2)
1.875 in
48.00 mm

Dimension G
1 in
25.40 mm

Dimension SL
0.630 in
16.00 mm

Cubic inches
15.89500 in³


Performance Data

Normal Temperature Range
-40 to 212 ºF
-40 to 100 ºC

Nominal Torque
1450.00 in·lb

Angular Misalignment
1.00 º

Parallel Misalignment
0.150 in

Moment of Inertia (Solid) WR2
7.002 lb·in²

Rated HP at 100 rpm
163.80 hp

Shore Hardness
80A

Damping Capacity
High


Spider Performance
  • Nitrile Butadiene (Buna N) Rubber is a flexible elastomer material that is oil resistant, resembles natural rubber in resilience and elasticity and operates effectively in temperature range of -40° to 212° F (-40° to 100° C). Good resistance to oil. Standard elastomer. (Also applies to SXB Cushions.)




Elastomers in Compression
    Lovejoy offers four types of elastomer designs to allow for additional flexibility in addressing specific application requirements. One piece designs are used in the “L” and “AL” models (referred to as spiders) and multiple part “load cushions” are used in the “C” and “H” model couplings. The load cushions are in sets of 6 to 14 pieces depending on coupling size.
Solid Center Spider
  • The solid center design is commonly used design when shafts of the driver and driven equipment can be kept separate by a standard gap
Open Center Spider
  • The open center design allows for the shafts of the driver and driven to be positioned within a short distance
  • Open center spiders offer shaft positioning flexibility but have a lower RPM capacity (1,750 RPM maximum for NBR, 3,600 maximum for Urethane/Hytrel®)
Cushions
  • Used exclusively for the C and H Type couplings
  • Load cushions are held in place radially by a steel collar which is attached to one of the hubs
Snap Wrap Flexible Spider
  • Design allows for easy removal of the spider without moving the hubs
  • Allows for close shaft separation all the way up to the hubs maximum bore
  • Maximum RPM is 1,750 RPM with the retaining ring, but if used with the LC Type (with collar) the normal RPM rating of the coupling applies
  • Style is available in NBR and Urethane only, and in limited sizes


Notes

Notes 
  • NBR standard shore hardness is 80A ±5A – Except L035=60A. Other softer or harder designs are available in NBR material; consult Lovejoy.
  • AL Type couplings use the same spiders as L Type couplings, except AL150 which has four jaws instead of three.


 MORE IMAGES 

·  AL150_NBR_SPIDER_2D drawing

·  Solid Center Spiders - Metric-2


 DOWNLOADS 

Jaw Type Catalog (pdf catalog)

Installation Instructions for Jaw Type Couplings

Installation Video for Jaw Type Couplings


Add To Cart Request Quote
<