Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
    CCS Type Cut-Out Shifter Couplings

      The CCS Type coupling consists of two flex hubs, one special sleeve without lubrication holes and one accessory kit which includes a special seal for the hub that disengages to eliminate undue friction when the disengaged hub is turning in the sleeve. Standard hub is hand packed with grease.
  • Designed for quick disengagement between the driver and driven equipment
  • Special seal in disengagement hub to prevent undue friction when hub turns in sleeve
  • Widely used on dual drive operations and equipment operating in tandem
  • Available with pins to maintain sleeve in engaged and disengaged positions
  • Shifting mechanisms available upon request
Unit of Measure

Specifications

Description 

 N/A CCS-2.5-HUB-2-1/4-1/2X1/4KW

Type

 N/A Gear Coupling Hubs

Hub Material

 N/A AISI 1045

Style

 N/A Bored

Color

 N/A Metallic

Coupling Type

 N/A Gear

Weight

 N/A 5.15 lb

Dimensional Data

Bore Size 

 N/A 2 1/4 in

Size

 N/A 2 1/2

Keyway Size (W x D)

 N/A 1/2 x 1/4 in

Overall Length

 N/A 4.750 in120.65 mm

Outside Diameter

 N/A Per Customer Specifications

Max. Bore (Dimensions ID1/ID2)

 N/A 2.630 in70.00 mm

Dimension D

 N/A 5.500 in139.70 mm

Distance between Shaft Ends (Dimension G1)

 N/A 0.750 in19.05 mm

Distance between Shaft Ends (Dimension G)

 N/A 0.250 in6.35 mm

Dimension HD

 N/A 3.94 in100.08 mm

Dimension HD1

 N/A 3.925 in99.70 mm

Dimension HL

 N/A 2.250 in57.15 mm

Dimension LS

 N/A 3.880 in98.55 mm

Dimension R

 N/A 6.410 in162.81 mm

Length of Travel to Disengage Sleeve (Dimension T)

 N/A 0.690 in17.53 mm

Dimension W

 N/A Per Customer Specifications

Cubic inches

 N/A 34.92810 in³

Performance Data

Nominal Torque

 N/A 30200.00 in·lb

Max. Speed (Unbalanced)

 N/A 3750.00 rpm

Max. Angular Misalignment

 N/A 0.50 º

Parallel Misalignment

 N/A 0.007 in

Features

Features 

 N/A
  • Permits quick disengagement of driver and driven shafts without disassembling the coupling
  • Widely used on dual drives and equipment operated in tandem
  • Special seal for disengaging hub
  • Also available with pins to maintain sleeve in both engaged and disengaged positions

Notes

Notes 

 N/A
  • The BSE (distance Between Shaft Ends) vary between G and G1.
  • Puller Holes are standard on sizes 4 through 6.
  • Puller Holes are available for sizes 7/8 through 3.5 at an additional charge.
  • Interference bores with no set screws are standard unless otherwise specified.
  • Inch bores and keyway tolerances conform to ANSI / AGMA 9002-B04.
  • For metric bores and keyway tolerances, consult Lovejoy Engineering Section.
  • Larger sizes are available, please consult Lovejoy Technical Support.