Batch CAD Cart (0)
  • Cart is empty
    CMM Type Mill Motor Couplings

    The CMM Type coupling consists of one standard flex hub, one universal hub, one standard sleeve and one accessory kit consisting of seals and snap rings.
  • Designed with longer universal hub on one end to accommodate straight or tapered shafts
  • Standard hub and sleeve on the other end
  • Universal hub bored to customer specifications
  • Available with longer universal hubs on both ends
Unit of Measure

Specifications

Description 

N/A CMM-2-HUB-W/CENTER

Type

N/A Gear Coupling Hubs

Hub Material

N/A AISI 1045

Style

N/A Unbored

Color

N/A Metallic

Bore Type

N/A Center

Coupling Type

N/A Gear

Weight

N/A 11.50 lb

Complete Coupling Weight

N/A 19.00 lb

Dimensional Data

Size

N/A 2

Overall Length 

N/A Determined by Length of Mill Motor Hub

Outside Diameter

N/A 4.750 in4.75 mm

Max. Bore (Dimensions ID1/ID2)

N/A 2.130 in56 mm

Dimension CBD

N/A 3.000 in76.20 mm

Max. Safe Counterbore (Dimension CBD1)

N/A 2.750 in69.85 mm

Dimension DC

N/A 0.190 in4.83 mm

Dimension DC1

N/A Determined by Customer Specifications

Dimension G

N/A 0.130 in3.30 mm

Max. Length of Universal Hub (Dimension HL1)

N/A 4.630 in117.60 mm

Dimension HL

N/A 2.060 in52.32 mm

Dimension HD

N/A 3.250 in82.55 mm

Dimension LS

N/A 2.560 in65.02 mm

Dimension R

N/A 4.880 in123.95 mm

Dimension SL

N/A 1.280 in32.51 mm

Cubic inches

N/A 21.75875 in³

Performance Data

Nominal Torque

N/A 20200.00 in·lb

Max. Speed (Unbalanced)

N/A 4200 rpm

Max. Angular Misalignment

N/A 0.50 º

Parallel Misalignment

N/A 0.007 in

Features

Features 

N/A
  • Specifically designed for mill motors with tapered bores
  • Universal hub counterbored for the nut on the end of the motor shaft
  • One piece cylindrical sleeve for smoother, faster, quieter and safer operation
  • Quick assembly and disassembly

Notes

Notes 

N/A
  • HL1 Dimensions are the maximum lengths of Universal hubs kept in stock and altered to customer specifications.
  • Longer length hubs are made to order.
  • Dimension CBD1 as shown is the maximum safe counterbore. Diameter of this counterbore is to customer specifications.
  • Rough bore mill motor hubs are manufactured to HL1 length with straight bores.
  • Puller Holes are standard on sizes 4 through 12.
  • Puller Holes are available for sizes 7/8 through 3.5 at an additional charge.
  • Interference bores with no set screws are standard unless otherwise specified.
  • Inch bores and keyway tolerances conform to ANSI / AGMA 9002-B04.
  • For metric bores and keyway, consult Lovejoy Engineering Section.
  • Larger sizes are available, please consult Lovejoy Technical Support.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.