Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Cylindrical Roller Radial Bearings - Four-Row
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Cylindrical Roller Bearings > Cylindrical Roller Radial Bearings - Four-Row > Part Number 800RX3164  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number 800RX3164, Cylindrical Roller Radial Bearings - Four-Row


Timken’s four-row cylindrical roller bearings are designed for the rigors of daily use in applications where moderate and high speeds, high radial loads, elevated temperatures and debris are constant challenges. Designed with well-balanced cross sections, these bearings provide high-radial-load capacity within the bearing envelope.

The radial internal clearance (RIC) for the bearing assembly must be included when ordering either a) the complete assembly or b) with the inner-ring set. It is advisable to order the inner-ring set independent of the outer ring set when the final grind of the inner-ring O.D. is accomplished after mounting on the roll neck.

The RX bearings are four-row construction, having two single flanged outer races and rib rings for roller spacing. This allows for complete disassembly for inspection. The RX style is usually preferred in bearings above 400 mm bore.

Both brass and pin-type cages are available in this bearing style. Most inners are two-piece assemblies.

  • Two outer rings with three rib rings.
  • Two inner rings.
  • Four pin-type steel cages.
  • RX-1 – with lubrication grooves and holes on outer rings.
  • RX-9 – with oil-mist nozzles and O-rings in outer rings.
  • RX-11 – with lubrication grooves, holes and O-rings on outer rings.



Unit of Measure: Imperial Metric Both

Specifications  · Bearing Dimensions  · Mounting Data  · Lubrication Data  · Sub Assembly Part Numbers  · Applications  · Design Benefits  · Radial Internal Clearance (RIC)  · Lubrication  · Material  · Mounting Design and Fitting Practice  · Main Design Types

Specifications

Bore d
800 mm

Static Load Rating Co
58800000 N
13240000 lbf

Dynamic Load Rating C11
22600000 N
5080000 lbf
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.


Bearing Dimensions

O.D. D
1080 mm
42.5197 in

Width B
750 mm
29.5276 in

Width C
750 mm
29.5276 in

DUR/DOR F/E
880 mm
34.6457 in

Type
RX-1


Mounting Data

Chamfer rsmin
0 mm
0 in

Chamfer r1smin1
18 mm
0.710 in

Angle of Chamfer r1smin
20 º

Backing Shaft Diameter ds
863.7 mm
34.0000 in

Backing Housing Diameter Ds
1016 mm
40.0000 in
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.


Lubrication Data

Lubrication Groove g
25.3 mm
1.00 in

Lubrication Hole Diameter h
13.0 mm
0.51 in

Number of Lubrication Holes
16


Sub Assembly Part Numbers

Inner-Ring Set
800ARXS3164

Outer-Ring Set
880RXS3164


Applications

Engineered primarily for rolling mill roll-neck applications,Timken’s four-row cylindrical bearings are commonly used inwork roll or back-up roll positions in flat product, long productand structural mills.

Product Features

  • Available in sizes 140 mm I.D. – 2000 mm O.D. (5.512 in – 78.740 in).
  • Case-hardened rings and rollers enhance durability.
  • Inner races are interchangeable with outer assemblies.
  • Manufactured to P6 boundary and P5 run out tolerances.
  • Roller profiles are custom designed and manufactured for optimum performance.
  • Straight and tapered bores are available.


Design Benefits

Our most common configurations available are types RY , RYL andRX. However, Timken also will custom design and manufacturebearings for your particular size and application requirements.If you have a new mill application, our engineers will work withyou in the earliest design stages to help you select the rightbearings.


Radial Internal Clearance (RIC)

Timken’s standard bearings offer different clearances, such asC3 or C4 according to DIN 620-4. If needed for your application,they can be furnished with a tapered bore.

Timken supplies inner rings in two ways: a finished state with noadditional grinding required or a semi-finished condition withappropriate grind stock. Semi-finished inner rings allow milloperators to optimize the roll’s precision by finish grinding theinner ring after mounting it onto the roll.

The part numbers for these bearings and inner-ring assembliesare identified by a CF suffix.


Lubrication

Timken four-row cylindrical roller bearings can be used withgrease, oil-air, oil-mist or circulating-oil systems. The bearingsmust be correctly lubricated for maximum performance througheither lubrication grooves, holes in the outer-ring O.D. or throughintegrated face slots on the outer-ring faces. See detailed designtypes on pages 84-87 for further information on the standardlubrication configurations by bearing type.


Material

Our bearings are designed to provide superior size stability,fracture toughness and reliability. By using only high quality,carburized alloy, and applying a special heat-treatment duringthe manufacturing process, we are able to produce bearingsthat can withstand the heavy stresses and impact loading oftenexperienced by multi-row cylindrical roller bearings used inrolling mills.


Mounting Design and Fitting Practice

The cylindrical roller bearing design accommodates radialloading only, therefore, a separate thrust bearing must be usedto provide axial shaft location.

The housing fitting practice usually results in a loose fit tofacilitate easy removal at regular maintenance intervals. Thepreferred shaft fit is tight. There are occasions where loose shaftfits are tolerated, such as on some roughing-mill equipment. Inthe cases where a shaft fit is loose, inner-race bore lubricationgrooves must be incorporated in the bearing. Check with yourTimken representative for a more details on mounting four-rowcylindrical roller bearings. Mounting information also is availablein the Timken Engineering Manual (order no. 10424) on timken.com/catalogs.

In order to facilitate the dismounting, face slots can be added onthe inner rings (W30B modification code).

Inner rings can be ordered separately from the outer assemblyin order to equip additional spare rolls. Inner- and outerringassemblies are interchangeable in regard to internalclearance.


Main Design Types

Optimized rolling elements and race geometry provides highradial-load capacity within the bearing envelope. In addition,multiple cage designs and materials allow for design flexibilityand preset radial clearance simplifies the installation process.



 DOWNLOADS 

Catalog and Technical Information - Cylindrical Roller Bearings


Add To Cart Request Quote
<