Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

 N/A 184.15 mm7.25 in

D - Outer Diameter

 N/A 231.775 mm9.1250 in

Dimension C/B

 N/A 76.2 mm3.0000 in

Specifications

Static Load Rating Co

 N/A 1130000 N253000 lbf
Dynamic Load Rating C11 N/A 524000 N118000 lbf
Geometry Factor Cg2 N/A 0.1586

Thermal Speed Ratings - Oil

 N/A 1800 rpm

Thermal Speed Ratings - Grease

 N/A 1600 rpm

Mounting Data

Chamfer rsmin

 N/A 3.050 mm0.12 in

Max. Mounting Dimensions Clearance Fit 1

 N/A 184.15 mm7.25 in

Min. Mounting Dimensions Clearance Fit 1

 N/A 184.120 mm7.2488 in

Max. Mounting Dimensions Clearance Fit 2

 N/A 231.821 mm9.1268 in

Min. Mounting Dimensions Clearance Fit 2

 N/A 231.775 mm9.125 in

Max. Mounting Dimensions Tight Transition Fit S

 N/A 7.2480 mm184.099 in

Min. Mounting Dimensions Tight Transition Fit S

 N/A 184.069 mm7.2468 in

Max. Mounting Dimensions Tight Transition Fit H

 N/A 231.714 mm9.1226 in

Min. Mounting Dimensions Tight Transition Fit H

 N/A 231.760 mm9.1244 in

Shoulder Diameter Da

 N/A 216.00 mm8.500 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

 N/A IR-9611648
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.