Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

 N/A 95.25 mm3.75 in

D - Outer Diameter

 N/A 120.650 mm4 3/4 in

Dimension C/B

 N/A 50.8 mm2.0000 in

Specifications

Static Load Rating Co

 N/A 398000 N89400 lbf
Dynamic Load Rating C11 N/A 193000 N43300 lbf
Geometry Factor Cg2 N/A 0.1011

Thermal Speed Ratings - Oil

 N/A 3700 rpm

Thermal Speed Ratings - Grease

 N/A 3300 rpm

Mounting Data

Chamfer rsmin

 N/A 2.540 mm0.1 in

Max. Mounting Dimensions Clearance Fit 1

 N/A 95.25 mm3.75 in

Min. Mounting Dimensions Clearance Fit 1

 N/A 95.227 mm3.7491 in

Max. Mounting Dimensions Clearance Fit 2

 N/A 120.691 mm4.7516 in

Min. Mounting Dimensions Clearance Fit 2

 N/A 120.650 mm4.750 in

Max. Mounting Dimensions Tight Transition Fit S

 N/A 3.7487 mm95.217 in

Min. Mounting Dimensions Tight Transition Fit S

 N/A 95.192 mm3.7477 in

Max. Mounting Dimensions Tight Transition Fit H

 N/A 120.594 mm4.7478 in

Min. Mounting Dimensions Tight Transition Fit H

 N/A 120.635 mm4.7494 in

Shoulder Diameter Da

 N/A 111.13 mm4.375 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

 N/A IR-506032 IR-526032
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.