Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

 N/A 101.60 mm4.00 in

D - Outer Diameter

 N/A 127 mm5 in

Dimension C/B

 N/A 50.8 mm2.0000 in

Specifications

Static Load Rating Co

 N/A 428000 N96200 lbf
Dynamic Load Rating C11 N/A 201000 N45100 lbf
Geometry Factor Cg2 N/A 0.106

Thermal Speed Ratings - Oil

 N/A 3500 rpm

Thermal Speed Ratings - Grease

 N/A 3100 rpm

Mounting Data

Chamfer rsmin

 N/A 2.540 mm0.1 in

Max. Mounting Dimensions Clearance Fit 1

 N/A 101.60 mm4.00 in

Min. Mounting Dimensions Clearance Fit 1

 N/A 101.577 mm3.9991 in

Max. Mounting Dimensions Clearance Fit 2

 N/A 127.041 mm5.0016 in

Min. Mounting Dimensions Clearance Fit 2

 N/A 127.000 mm5.000 in

Max. Mounting Dimensions Tight Transition Fit S

 N/A 3.9986 mm101.564 in

Min. Mounting Dimensions Tight Transition Fit S

 N/A 101.542 mm3.9977 in

Max. Mounting Dimensions Tight Transition Fit H

 N/A 126.944 mm4.9978 in

Min. Mounting Dimensions Tight Transition Fit H

 N/A 126.985 mm4.9994 in

Shoulder Diameter Da

 N/A 117.48 mm4.625 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

 N/A IR-526432 IR-546432 IR-566432
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.