Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
  • Clearance fit suggested for outer ring when housing is stationary relative to load.
  • Tight transition fit suggested if housing rotates relative to load.
  • Consult your Timken representative for oscillating applications (e.g., low radial-clearance concerns).
  • Unmarked end of outer ring should be assembled against housing shoulder to clear maximum allowed housing fillet (ras max).
  • Meets Military Standard MS 51961.
Unit of Measure

Bearing Dimensions

Shaft Diameter (Fw)

 N/A 127.00 mm5.00 in

D - Outer Diameter

 N/A 165.1 mm6 1/2 in

Dimension C/B

 N/A 63.5 mm2.5000 in

Specifications

Static Load Rating Co

 N/A 684000 N154000 lbf
Dynamic Load Rating C11 N/A 345000 N77600 lbf
Geometry Factor Cg2 N/A 0.1213

Thermal Speed Ratings - Oil

 N/A 2800 rpm

Thermal Speed Ratings - Grease

 N/A 2500 rpm

Mounting Data

Chamfer rsmin

 N/A 2.540 mm0.1 in

Max. Mounting Dimensions Clearance Fit 1

 N/A 127.00 mm5.00 in

Min. Mounting Dimensions Clearance Fit 1

 N/A 126.975 mm4.9990 in

Max. Mounting Dimensions Clearance Fit 2

 N/A 165.141 mm6.5016 in

Min. Mounting Dimensions Clearance Fit 2

 N/A 165.100 mm6.500 in

Max. Mounting Dimensions Tight Transition Fit S

 N/A 4.9984 mm126.959 in

Min. Mounting Dimensions Tight Transition Fit S

 N/A 126.934 mm4.9974 in

Max. Mounting Dimensions Tight Transition Fit H

 N/A 165.044 mm6.4978 in

Min. Mounting Dimensions Tight Transition Fit H

 N/A 165.085 mm6.4994 in

Shoulder Diameter Da

 N/A 150.81 mm5.938 in

Sub Assembly Part Numbers

Used with Inner Ring Designation

 N/A IR-648040
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.