Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
  • Additional radial load-carrying capability compared to single-row product.
  • Designed to ISO/DIN specified interchangeable dimensions.
  • Sold as complete assembly.

NNU-1
  • Outer rings with solid ribs.
  • Lubrication grooves and holes on outer rings.
  • One solid brass cage.

The radial internal clearance (RIC) for the bearing assembly must be included when ordering the complete assembly.
Unit of Measure

Specifications

Bore d

 N/A 340.000 mm

Static Load Rating Co

 N/A 7580000 N1704000 lbf
Dynamic Load Rating C11 N/A 4660000 N1050000 lbf
Geometry Factor Cg2 N/A 0.2580

Thermal Speed Ratings - Oil

 N/A 530 rpm

Thermal Speed Ratings - Grease

 N/A 490 rpm

Bearing Dimensions

O.D. D

 N/A 580 mm22.8346 in

Width B

 N/A 243 mm9.5669 in

DUR/DOR F/E

 N/A 402 mm15.8268 in

Mounting Data

Chamfer rsmin

 N/A 5 mm0.200 in
Chamfer r1smin3 N/A 5 mm0.200 in

Backing Shaft Diameter ds

 N/A 391 mm15.3900 in

Backing Housing Diameter Ds

 N/A 530 mm20.8700 in

Lubrication Data

Lubrication Groove g

 N/A 19.3 mm0.76 in

Lubrication Hole Diameter h

 N/A 9.5 mm0.37 in

Number of Lubrication Holes

 N/A 10
Dimension S4 N/A 9.60 mm0.380 in
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Cg factor for bearing without inner ring.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Permissible axial displacement from normal position of one bearing ring in relation to the other.