All Product Types > ENGINEERED BEARINGS > Cylindrical Roller Bearings > Inner Ring (IR) > Part Number IR-809640  

Part Number IR-809640, Inner Ring (IR)

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • Ideal choice where the shaft is not practical to use as inner raceway.
  • Designed to meet established inch tolerances.
  • Maximum shaft fillet radius cannot exceed inner-ring bore chamfer as shown.
  • Optional centralized lubrication groove (bore) or through hole available – specify when ordering.
  • Designed to be axially clamped against shoulder for loose transition fit on shaft.
  • After mounting, for tight transition fit (keeping inner ring from rotating relative to shaft), inner-ring O.D. must not exceed raceway diameter on matching bearing.
  • After mounting, if O.D. of inner ring exceeds the required raceway diameter for matching bearing, ring should be ground to proper diameter while mounted on shaft.
  • Unmarked end of inner ring to be assembled against the shaft shoulder to ensure clearing the maximum allowable shaft fillet as indicated in tables shown.




Specifications  · Dimensions  · Sub Assembly Part Numbers

Specifications

Shaft Diameter
5 in

Max. Loose Transition Fit S
4.9994 in
126.985 mm

Min. Loose Transition Fit S
4.9985 in
126.962 mm

Max. Interference Fit
5.0013 in
127.033 mm

Min. Interference Fit
5.0006 in
127.015 mm


Dimensions

Dimension D
5.000 in
127 mm

Dimension F
6 in
152.400 mm

Dimension B
2.5000 in
63.500 mm

Chamfer rsmin
0.12 in
3.05 mm


Sub Assembly Part Numbers

Used with Bearing Designation
HJ-9612040


 MORE IMAGES 

·  Inner Ring (IR)-2



 DOWNLOADS 

Catalog and Technical Information - Cylindrical Roller Bearings