Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information

This arrangement is specifically designed for the pump industry and is available in a variety of industry standard shaft separations. The shaft center spacer drops out to facilitate easier maintenance of pump parts without disturbing the alignment of pump and motor. Spacer type couplings utilize either standard delta hubs or optional round hubs. The center member of the Deltaflex is captured by the construction of the spacer flanges for greater safety. Standard spacer drop out lengths are available to accommodate shaft separations of 3.50, 4.38, 5, 7, 10, 12 and 15 inches. Special spacer lengths and stainless steel spacer couplings are available as an option.

Type 3 (Spacer Type) Deltaflex coupling are comprised of two hubs, two spacer flanges (with hardware), and a dropout spacer.

 
Unit of Measure

Specifications

Description 

 N/A 60-DLT DROPOUT-BSE=7"

Hub Style

 N/A Delta

Coupling Type

 N/A Flex-Link

Material

 N/A All-Metal

Color

 N/A Metallic

Weight

 N/A 14.00 lb

Dimensional Data

Size

 N/A 060

Keyway Size (W x D)

 N/A No Keyway

Length thru Bore

 N/A 7.00 in177.80 mm

Overall Length

 N/A 11.060 in281.00 mm

Outside Diameter

 N/A 7.250 in

Max. Bore for Delta Hubs (Dimensions ID1/ID2)

 N/A 2.500 in64.00 mm

Dimension BC

 N/A 3.880 in98.55 mm

Dimension BE

 N/A 7.000 in178.00 mm

Dimension P

 N/A 2.623 to 2.625 in66.624 to 66.675 mm

Dimension Q

 N/A 0.120 in3.05 mm

Dimension R

 N/A 0.940 in23.88 mm

Dimension S

 N/A 5.120 in130.00 mm

Dimension TH (Axial Cap / Screw Tap)

 N/A 3/8-16 x 0.88

Cubic inches

 N/A 367.93750 in³

Performance Data

Max. Continuous Torque

 N/A 4100.00 in·lb

Peak Overload Torque

 N/A 6250.00 in·lb

Rated HP at 100 rpm

 N/A 6.50 hp

Rated HP at 875 rpm (Standard Motor)

 N/A 57.00 hp

Rated HP at 1,150 rpm (Standard Motor)

 N/A 75.00 hp

Rated HP at 1,750 rpm (Standard Motor)

 N/A 114.00 hp

Rated HP at 3,500 rpm (Standard Motor)

 N/A 228.00 hp

Coupling Design

Coupling Design

 N/A
    The Deltaflex coupling is the real solution to installation, misalignment, and performance problems. Conventional couplings – even when carefully aligned to the manufacturer’s specifications – cannot match the low level of vibration, moment of inertia, and additional cushion for future misalignment of a visually aligned Deltaflex coupling.
    In addition, the Deltaflex coupling gives longer life to equipment shaft bearings. That means longer operating time and reduced maintenance cost. The Deltaflex can handle greater shaft misalignment without generating heavy reaction loads on the equipment shaft bearings.
    A properly applied and installed Deltaflex coupling offers more equipment protection compared to conventional couplings.

Features

Features 

 N/A
  • Maximum misalignment capabilities, with negligible reactionary load, for longer equipment bearing life
  • Operates as smoothly when misaligned as when perfectly aligned
  • No lubrication and no maintenance required
  • Equipment can be visually aligned. No special tools are required, which saves on installation time and cost
  • Eliminates premature equipment bearing and seal failure resulting from misalignment forces. This means greater equipment productivity
  • Torsionally stiff coupling with no backlash means it is capable of high speed applications, within catalog ratings
  • Provides long-term performance and economy
  • Available in 5 basic sizes, from 10HP to 900HP
  • Standard all-metal and stainless steel versions are both available from stock
  • Many configurations are available, including shaft-to-shaft, spacer, floating shaft, and special assemblies

Notes

Notes 

 N/A
  • Size 50: In some bore sizes the tap is 5/8-18.
  • Maximum bores are provided with standard keyway.
  • RSB hubs do not have a keyway.
  • Both Delta hubs and Round hubs are provided with two set screws at 120°.
  • Minimum bore hubs are furnished with 2 set screws at 120°, No Keyway.
  • S is the Spacer drop out or floating shaft length, S = BE-2(R).
  • LTB is the length through the hub bore. OAL is the overall length, OAL = BE + 2(LTB).
  • BE is the distance between the ends of equipment shafts—please supply this dimension when placing orders, BE = OAL-2 (LTB), BE = S + 2 (R), BE < 18 inch = Spacer coupling (Type 3); BE > 18 inch = Floating Shaft coupling (Type 4). ED
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.