Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TSF (Tapered Single with Flange) Metric
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TSF (Tapered Single with Flange) > Tapered Roller Bearings - TSF (Tapered Single with Flange) Metric > Part Number JL730646 - JL730612-B  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number JL730646 - JL730612-B, Tapered Roller Bearings - TSF (Tapered Single with Flange) Metric


Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
L730600

Cone Part Number
JL730646

Cup Part Number
JL730612-B

Design Unit
Metric

Cage Material
Stamped Steel


Dimensions

d - Bore
150 mm
5.9055 in

D - Cup Outer Diameter
205.000 mm
8.0709 in

D1 - Flange Outer Diameter
210.000 mm
8.2677 in

B - Cone Width
28.575 mm
1.1250 in

C - Cup Width
21.438 mm
0.8440 in

C1 - Cup Flange Width
4.862 mm
0.1914 in

T1 - Bearing Width to Flange
12.000 mm
4.724 in


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
3.300 mm
0.13 in

r - Cup Backface "To Clear" Radius2
3.30 mm
0.130 in

da - Cone Frontface Backing Diameter
158 mm
6.22 in

db - Cone Backface Backing Diameter
164 mm
6.46 in

Da - Cup Frontface Backing Diameter
200.91 mm
7.91 in

Ab - Cage-Cone Frontface Clearance
2 mm
0.08 in

Aa - Cage-Cone Backface Clearance
2 mm
0.08 in

a - Effective Center Location3
11.4 mm
0.45 in
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
50200 N
11300 lbf

C1 - Dynamic Radial Rating (1 million revolutions)2
194000 N
43500 lbf

C0 - Static Radial Rating
339000 N
76100 lbf

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
39400 N
8860 lbf
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.27

e - ISO Factor2
0.46

Y - ISO Factor3
1.31

G1 - Heat Generation Factor (Roller-Raceway)
295

G2 - Heat Generation Factor (Rib-Roller End)
103

Cg - Geometry Factor4
0.176
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.


 MORE IMAGES 

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-S

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-T



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers


Add To Cart Request Quote
<