Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TSF (Tapered Single with Flange) Metric
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TSF (Tapered Single with Flange) > Tapered Roller Bearings - TSF (Tapered Single with Flange) Metric > Part Number JP13049 - JP13010-B  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number JP13049 - JP13010-B, Tapered Roller Bearings - TSF (Tapered Single with Flange) Metric


Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
JP13000

Cone Part Number
JP13049

Cup Part Number
JP13010-B

Design Unit
Metric

Cage Material
Stamped Steel


Dimensions

d - Bore
130 mm
5.1181 in

D - Cup Outer Diameter
185.000 mm
7.2835 in

D1 - Flange Outer Diameter
192.000 mm
7.5591 in

B - Cone Width
27.000 mm
1.0630 in

C - Cup Width
21.000 mm
0.8268 in

C1 - Cup Flange Width
5.000 mm
0.1969 in

T1 - Bearing Width to Flange
13.000 mm
5.118 in


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
3.050 mm
0.12 in

r - Cup Backface "To Clear" Radius2
3 mm
0.12 in

da - Cone Frontface Backing Diameter
137 mm
5.39 in

db - Cone Backface Backing Diameter
143 mm
5.63 in

Da - Cup Frontface Backing Diameter
188.21 mm
7.41 in

Ab - Cage-Cone Frontface Clearance
4.8 mm
0.19 in

Aa - Cage-Cone Backface Clearance
1.5 mm
0.06 in

a - Effective Center Location3
8.9 mm
0.35 in
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
50800 N
11400 lbf

C1 - Dynamic Radial Rating (1 million revolutions)2
196000 N
44000 lbf

C0 - Static Radial Rating
283000 N
63600 lbf

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
41100 N
9250 lbf
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.24

e - ISO Factor2
0.47

Y - ISO Factor3
1.27

G1 - Heat Generation Factor (Roller-Raceway)
192

G2 - Heat Generation Factor (Rib-Roller End)
60.3

Cg - Geometry Factor4
0.106
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.


 MORE IMAGES 

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-S

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-T



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers


Add To Cart Request Quote
<