Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TSF (Tapered Single with Flange) Metric
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TSF (Tapered Single with Flange) > Tapered Roller Bearings - TSF (Tapered Single with Flange) Metric > Part Number XAE32010X - Y32010XR  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number XAE32010X - Y32010XR, Tapered Roller Bearings - TSF (Tapered Single with Flange) Metric


Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
32010X

Cone Part Number
XAE32010X

Cup Part Number
Y32010XR

Design Unit
Metric

Cage Material
Stamped Steel


Dimensions

d - Bore
50 mm
1.9685 in

D - Cup Outer Diameter
80 mm
3.1496 in

D1 - Flange Outer Diameter
84.000 mm
3.3071 in

B - Cone Width
20.000 mm
0.7874 in

C - Cup Width
15.500 mm
0.6102 in

C1 - Cup Flange Width
3.500 mm
0.1378 in

T1 - Bearing Width to Flange
8.000 mm
0.3150 in


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.25 mm
0.010 in

r - Cup Backface "To Clear" Radius2
1.0 mm
0.04 in

da - Cone Frontface Backing Diameter
55 mm
2.17 in

db - Cone Backface Backing Diameter
56 mm
2.2 in

Da - Cup Frontface Backing Diameter
79.50 mm
3.13 in

Ab - Cage-Cone Frontface Clearance
2.5 mm
0.1 in

Aa - Cage-Cone Backface Clearance
0.5 mm
0.02 in

a - Effective Center Location3
-2 mm
-0.08 in
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
21500 N

C1 - Dynamic Radial Rating (1 million revolutions)2
82700 N
18600 lbf

C0 - Static Radial Rating
92700 N
20800 lbf

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
15500 N
3490 lbf
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.38

e - ISO Factor2
0.42

Y - ISO Factor3
1.42

G1 - Heat Generation Factor (Roller-Raceway)
34

G2 - Heat Generation Factor (Rib-Roller End)
20.3

Cg - Geometry Factor4
0.0853
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.


 MORE IMAGES 

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-S

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-T



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers


Add To Cart Request Quote
<